Wireless adapters can often cause issues, especially if they are not configured properly. Sometimes, they may stop working altogether. This issue can be quite frustrating. Read on and learn how to fix Wi-Fi adapter not working issue.
Through Network Troubleshooter
- Navigate to the Settings on your system.
- After that, click on the ‘Update and Security’ option.
- Then choose the Troubleshoot option.
- You should click on the ‘Internet Connections’ option and then choose ‘Run the troubleshooter.’
- Later, pursue the on-screen steps and allow the procedure to finish.
- Now, reboot the system.
Reset the IP or TCP Stack
- Go to the Windows menu, and right-click on it then select the Command Prompt.
- After that, input the pursuing lines into it and hit the Enter key:
- netsh int ip reset
- netsh int tcp set heuristics disabled
- netsh int tcp set global autotuninglevel=disabled
- netsh int tcp set global rss=enabled
- Now, reboot the system and check whether you are capable of linking to the Wi-Fi.
Modify the Adapter Settings
- Navigate to the Network Adapter’s Properties and check the wireless adapter that is recently performing.
- You should browse for the ‘Internet Protocol Version 6 (TCP/IPv6)’ beneath the choices that bring up an untick the IPV6to turn it off.
- Now select the OK button and reboot the system to enforce the modification you made.
Install the Network Adapter Again
- Navigate to the Windows Search section on your system.
- After that, input ‘devm’ into it and hit the Enter key to invoke the Device Manager.
- You should locate the network adapter.
- Go to the network adapter, and right-click on it then select the Uninstall button.
- You have to pursue on-screen steps.
- Later, reboot the system.
- Finally, reach the network adapter driver again and install it.
Move to the Maximum Performance Mode
- Navigate to the Windows Search and input ‘power management’ into it to invoke the ‘Power and Sleep’ section.
- Beneath the ‘Related Settings’, select the ‘Additional Power Settings’ option.
- After launching the Power Options, find the recent plan and select the ‘Change plan settings’ option.
- You should reach the ‘Change advanced power settings’ option.
- Later, find the ‘Wireless Adapter Settings’ option and change ‘power saving mode to Maximum Performance.
- Now, choose the Apply and then OK buttons to apply the changes.